KOOTENAY INTERCEPTS 721 GPT SILVER OVER 4 METERS WITHIN 415 GPT SILVER OVER 11.5 METERS ON THE E & J VEINS AT COLUMBA SILVER PROJECT, MEXICO

December 12, 2019 Download PDF

Kootenay Silver Inc. (TSXV: KTN) (the “Company” or “Kootenay”) is pleased to announce assay results from six core drill holes recently completed on the E and J Veins at its Columba high-grade silver project (the “Property”), located in Chihuahua State, Mexico.

Recent Highlights of the Continuing Drill Program:

  • Hole CDH-19-030: 982 gpt silver over 1.9 meters within an intercept of 721 gpt silver over 4 meters and 415 gpt silver over 11.5 meters.This intercept is within a new type of mineralization hosted within silicified breccias in close proximity to a distinct lithologic contact. The overall interval averaged 200 gpt silver over 25.85 meters intercepting quartz veinlets and hydrothermal breccias across the J Vein structure.
  • Hole CDH-19-029: 67 gpt silver over 6.25 meters including 172 gpt silver over 2.09 meters intercepting quartz veinlets in rhyolite and hydrothermal breccias across the J Vein structure;
  • Hole CDH-19-031: 314 gpt silver over 3.0 metres including 776 gpt silver over 0.63 metres in hydrothermal breccias and quartz veinlets across the E Vein structure. This intercept may be the same breccia horizon as encountered in hole CDH-19-030. More drilling is required to confirm the orientation and correlation of these breccias;
  • Hole CDH-19-033: 146 gpt silver over 9.57 meters within 48 gpt silver over 59.8 meters intercepting the E Vein comprised of fault zone, quartz veinlets, manganese calcite vein, and brecciation across the E Vein structure); and
  • Hole CDH-19-034: 103 gpt silver over 6.63 meters in the E Vein (quartz-barite vein with banded textures) and 124 gpt silver over 1-meter intercepting quartz veinlets in rhyolite and hydrothermal breccias (along the E Vein Structure).

Click the following links to view: Plan Map and Cross Sections for holes 29 to 34

Kootenay President and CEO James McDonald states “The high-grade intercept in hole CDH-19-030 represents an exciting new style of breccia and stockwork mineralization identifying a new and potentially wide-spread target area. It is about 700 meters away from the historically mined F Vein within a completely different vein. Similar breccia mineralization was seen in CDH-19-031 about 200 meters away and may be the same mineral zone. Determining if this is the case will be one of the priorities for the next phase of drilling in the new year.”

Detailed Drill Results and Expanded Discussion

Hole ID

From (meters)

To (meters)

Interval (meters)

Silver gpt

Pb %

Zn%

Geologic Intersection

CDH-19-029

42.7

45.35

2.65

73

0.02

0.04

J Vein

114

166

52

26

0.01

0.04

Z Vein

Quartz veinlets in Rhyolite and Hydrothermal Breccias

Includes

128

136

8

67

0.02

0.05

Includes

130.21

132.3

2.09

172

0.05

0.1

Includes

164

166

2

104

0.02

0.06

CDH-19-030

67.1

76

8.9

76

0.02

0.11

J Vein - Fractured Zone, Quartz Barite vein

Includes

70.67

74

3.33

173

0.06

0.24

149.15

175

25.85

200

0.03

0.15

Z Vein

Quartz veinlets in Rhyolite and Hydrothermal Breccias

Includes

150.5

161.65

11.15

415

0.07

0.26

Includes

154

158.07

4.07

721

0.08

0.33

Includes

154

160.1

6.1

573

0.07

0.3

Includes

156.17

158.07

1.9

982

0.08

0.4

CDH-19-031

223

226

3

314

0.2

0.28

M? vein - Quartz veinlets in Rhyolite and Hydrothermal Breccias

Includes

224.15

224.78

0.63

776

0.41

0.32

CDH-19-032

165

175

10

24

0.27

0.6

E vein - Brecciated rhyolite with stockwork of Quartz and Barite

238.85

289

50.15

20

0.02

0.07

Quartz veinlets in Rhyolite and Hydrothermal Breccias

CDH-19-033

105.2

165

59.8

48

0.03

0.13

E vein - Fault zone, manganese calcite vein, and rhyolite fragments

Includes

150.95

160.52

9.57

146

0.27

1

CDH-19-034

38.15

54

15.85

68

0.02

0.05

Oxidized rhyolite with phenocrystals and quartz stockworks

Includes

41.2

47.83

6.63

103

0.04

0.04

E vein - Quartz-barite vein with banded textures

107

130.21

23.21

20

0.16

0.03

Quartz veinlets in Rhyolite and Hydrothermal Breccias

Includes

117

118

1

124

0.04

0.04

All widths are drilled widths. At this time, it is estimated true widths will range from 60 to 80% of drilled widths depending on dip of the vein and inclination of the hole. All silver composites rounded to the nearest whole number.

Expanded Drilling Discussion

CDH-19-029 and 19-034: These holes targeted the J and E vein structures along with numerous other smaller veins and splays. This area in general is characterized by wide zones of quartz veinlet stock working, brecciation and strong oxidation and argillic alteration. The area has the character of the upper parts of the epithermal system which if correct indicates stronger grades maybe encountered at depth (click see figure of epithermal model). This zonation can be seen already as silver grades increase from a 5 to 9 gpt range at surface to a 26 to 180 gpt range with a depth increase of 50 to 75 meters. Silver grade increases again from a 26 to 176 gpt silver range in hole CDH-19-029 to 200 to 980 gpt in hole CDH-19-030. Brecciation in hole CDH-19-030 shows very good grade potential in a new style of mineralization from the formal veins mined historically. The trend opens up greater potential for new discoveries while follow up drilling is required to determine the extent and continuity of mineralization.

Drilling has concluded for the year with 41 holes completed for a total of 6,853 meters of drilling. Further results will be complied and released once received and interpreted. Detailed results of the 34 holes drilled to date can be viewed by clicking the following link: Columba Drill Results.

The Company is in the process of planning its 2020 drill programs at the Columba and Copalito projects and will update with details.

Qualified Persons

The Kootenay technical information in this news release has been prepared in accordance with the Canadian regulatory requirements set out in National Instrument 43-101 (Standards of Disclosure for Mineral Projects) and reviewed and approved on behalf of Kootenay by James McDonald, P.Geo, President, CEO & Director for Kootenay, a Qualified Person.

Sampling and QA/QC at Columba

All technical information for the Columba exploration program is obtained and reported under a formal quality assurance and quality control ("QA/QC") program. Samples are taken from core cut in half with a diamond saw under the direction of qualified geologists and engineers. Samples are then labeled, placed in plastic bags, sealed and with interval and sample numbers recorded. Samples are delivered by the Company to ALS Minerals ("ALS") in Chihuahua. The samples are dried, crushed and pulverized with the pulps being sent airfreight for analysis by ALS in Vancouver, B.C. Systematic assaying of standards, blanks and duplicates is performed for precision and accuracy. Analysis for silver, zinc, lead and copper and related trace elements was done by ICP four acid digestion, with gold analysis by 30-gram fire assay with an AA finish. All drilling reported is HQ core and has been contracted to Globexplore Drilling from Hermosillo, Mexico.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

About Kootenay Silver Inc.

Kootenay Silver Inc. is an exploration company actively engaged in the discovery and development of mineral projects in the Sierra Madre Region of Mexico and in British Columbia, Canada. Supported by one of the largest junior portfolios of silver assets in Mexico, Kootenay continues to provide its shareholders with significant leverage to silver prices. The Company remains focused on the expansion of its current silver resources, new discoveries and the near-term economic development of its priority silver projects located in prolific mining districts in Sonora, State and Chihuahua, State, Mexico, respectively.

For additional information, please contact:

James McDonald, CEO and President at 403-880-6016

Ken Berry, Chairman at 604-601-5652; 1-888-601-5650

or visit: www.kootenaysilver.com

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS:

The information in this news release has been prepared as at December 11, 2019. Certain statements in this news release, referred to herein as "forward-looking statements", constitute "forward-looking statements" under the provisions of Canadian provincial securities laws. These statements can be identified by the use of words such as "expected", "may", "will" or similar terms.

Forward-looking statements are necessarily based upon a number of factors and assumptions that, while considered reasonable by Kootenay as of the date of such statements, are inherently subject to significant business, economic and competitive uncertainties and contingencies.Many factors, known and unknown, could cause actual results to be materially different from those expressed or implied by such forward-looking statements.Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date made.Except as otherwise required by law, Kootenay expressly disclaims any obligation or undertaking to release publicly any updates or revisions to any such statements to reflect any change in Kootenay’s expectations or any change in events, conditions or circumstances on which any such statement is based.

Cautionary Note to US Investors: This news release may contain information about adjacent properties on which we have no right to explore or mine. We advise U.S. investors that the SEC's mining guidelines strictly prohibit information of this type in documents filed with the SEC. U.S. investors are cautioned that mineral deposits on adjacent properties are not indicative of mineral deposits on our properties. This news release may contain forward-looking statements including but not limited to comments regarding the timing and content of upcoming work programs, geological interpretations, receipt of property titles, potential mineral recovery processes, etc. Forward-looking statements address future events and conditions and therefore involve inherent risks and uncertainties. Actual results may differ materially from those currently anticipated in such statements.

This press release uses the terms "Measured", "Indicated", and "Inferred" resources. United States investors are advised that while such terms are recognized and required by Canadian regulations, the United States Securities and Exchange Commission does not recognize them. "Inferred Mineral Resources" have a great amount of uncertainty as to their existence, and as to their economic and legal feasibility. It cannot be assumed that all or any part of an Inferred Mineral Resource will ever be upgraded to a higher category. Under Canadian rules, estimates of Inferred Mineral Resources may not form the basis of feasibility or other economic studies. United States investors are cautioned not to assume that all or any part of Measured or Indicated Mineral Resources will ever be converted into Mineral Reserves. United States investors are also cautioned not to assume that all or any part of a Mineral Resource is economically or legally mineable.

Subscribe

* indicates required